Three Tier 1:18 Scale Lighted LED Display Case 1:18 Scale Acrylic Display Case by M&J Toys

I would not recommend this to any one. The product is cheap Chinese plastic. I attempted to put three different 1:18 scale models in it, not one would fit. This is an over priced piece of garbage.

My full sized 1/18 scale models like Chevelles and GTOs and Grand Prix are too long for these display cases. Camaros and corvettes fit great. Beware if your models are all long. The displays are 11” wide.

I now have two of these and am considering a third. I use them to display 1/43 models. Each shelf is high enough to use risers so even more models can be displayed. I have not tried the lighting, because the cases are too far from a computer, but the positions of the lights should light up the models very well. The case has to be assembled, but the instructions are good, and the assembly process is well thought out.

This was a great buy to display my favorite Corvettes. I highly recommend.

Well packaged....easy to assemble.....lights work perfect.....it's sturdy no loose parts or gaps very happy will be buying more of these

I have mixed opinions about this case. I have 4 total. First off. They are a great way to display a 1/18 collection. The front cover slides out from the top which is nice but you do have to be a bit careful as the plexiglass is soft and will scratch. Now for the ugly. The ports for the lighting could be built better as one case had the ports snap off the circuit boards with very little pressure. Another case. Only the top light would work unless I taped the bottom wire to the back of the case so it holds pressure against the port to keep a good connection. One case. The bottom light does not work with any kind of "adjustment" to the wire. A bit pricey considering the quality.

Nothing was mentioned in the description that assembly is required. That is a VERY important fact to be left out.